Go Back   Serif Software Forums > Design and Publishing > PagePlus

Notices

PagePlus Questions about using PagePlus for desktop publishing

 
 
Thread Tools Display Modes
Old 30th November 2005, 09:59 PM   #1
David Lloyd-Hoare
Message imported from old Serif Forum
 
Posts: n/a
Lightbulb Printing Problems

I am using Page plus 11 and an Epson Stylus photo 830 and I have recently started experiencing printing problems. The paper is ejected (usually twice) and then it will usually print with misaligned with hardly any space at the top of the page. No other program on the computer is affected. Any ideas why this should suddenly start? I've reinstalled the printer drivers with no change.
 
Old 30th November 2005, 10:46 PM   #2
Geoff Blanthorn
Message imported from old Serif Forum
 
Posts: n/a
Lightbulb Re:Printing Problems

Do you have the printer set for paper the same size as the page in PP?

Geoff
 
Old 1st December 2005, 12:49 AM   #3
David Lloyd-Hoare
Message imported from old Serif Forum
 
Posts: n/a
Lightbulb Re:Printing Problems

H9 Geoff, I've checked that, and yes it's the same size (A4)
David
 
Old 1st December 2005, 06:59 PM   #4
John Hinckley
Message imported from old Serif Forum
 
Posts: n/a
Lightbulb Re:Printing Problems

David,

Your problem might be the drivers for your 830. I had a similar problem with this printer some months ago, although I admit that this was using PP10. I don't think its PP11 causing your problem. My issue was similar to yours in that the printer ejected either one or two blank sheets, printed one OK but without the top margin (i.e. right near the edge of the top and then leaving a great white margin at the bottom).
This got worse on any subsequent sheets as the misalignment became worse on pages 3 and 4. I was using expensive paper too for Wedding invitations!!

All of this was cured using updated drivers. Go to Epsons website and get the latest drivers and try again.

Hope this helps,

John
 
Old 3rd December 2005, 11:30 AM   #5
Ann Cook
Message imported from old Serif Forum
 
Posts: n/a
Lightbulb Printing - Times New Roman - Laser Printer

When I print ANYTHING in Times New Roman it comes out distorted and not really legible. This was OK in PagePlus 9 and Page Plus 10. Problem with both our Laser printers but OK on inkjets.
 
Old 3rd December 2005, 01:03 PM   #6
Mike Keller
Message imported from old Serif Forum
 
Posts: n/a
Lightbulb Re:Printing - Times New Roman - Laser Printer

Does Times New Roman print badly in other applications?

Mike Keller
 
Old 3rd December 2005, 01:16 PM   #7
Ann Cook
Message imported from old Serif Forum
 
Posts: n/a
Lightbulb Re:Printing - Times New Roman - Laser Printer

No only in PP11. Have re-installed font - but no change. I seem to remember a similar problem in one of the earlier versions of PagePlus, but can't remember how it was solved.
 
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 12:39 PM.